IMSAB components for industry and shipping

STARTPAGE

	:::	Mjukvaror
	:::	Startpaneler för dieselmotorer
	:::	Paneler för genn. agg.
	:::	Genset paneler
	:::	Tillbehör

OUR PRODUCTS

AGENTS FOR

	:::	Contact IMSAB
	:::	Send for more Information

Standard mjukvaror lösningar

Standard mjukvaror lösningar kan köpas direkt från IMSAB. Var vänlig kontakta JOBATEL AB vid behov av specialanpassad mjukvaror.

http://www.jobatel.com
(klicka för att öppna hemsidan i nytt fönster)

Standard mjukvaror lösningar (information finns enbart på engelska)


42xx	Configuration software for 42xx series modules • Configuration and Communications software for 4210 and 4220 controllers. • To configure a module, this software must be used in conjunction with the 810 PC Interface.


5xxx	Configuration software • Configuration and Communications software for 5210, 5220, 5310 and 5320 controllers. • To configure a module, this software must be used in conjunction with the 810 PC Interface.


801	Handheld configuration device for 509 controller	801Eng


810PC	Hardware interface between PC and controller • Used in conjunction with some DSE controllers to provide optical isolation between the PC and the generator controller • Connection between 810 interface and DSE controller can be extended to 100m allowing semi-remote monitoring and control. • Used with the following DSE control modules : 550, 555, 556, 557, 4210, 4220, 5210, 5220 • Used in conjunction with the following DSE configuration software (supplied on PC CDROM when the 810 hardware interface is purchased): 810 for Windows, 42xx for Windows, 5xxx for Windows • Available in either RS232 or USB versions. NOTE :USB version requires the P810 USB driver software. RS232 version does NOT require additional drivers.	810PCi


Link500	Communications software for 550/555 controllers • This software is used to communicate with the 550/555 controllers using either RS232 modems or a multidrop RS485 data link. • RS232 modems can either be connected to the public switched telephone network (PSTN Landline) or the GSM cellular network widely used in Europe and some other parts of the world. • Can also be used locally (within 100m) in conjunection with the P810 PC Interface.


P808	PC Configuration software and interface for 511/2, 520/1, 530, 540/1, 560 controllers • The 808 PC Configuration Software (used in conjunction with the P808 PC interface) is designed for use with the following DSE systems: • 511/512 manual start. • 520/521/560 auto-start. • 530 automatic transfer switch. • 540 range of protection expansion/annunciator modules. • The 808 interface allows the user to access the configuration stored within the module, enabling changes to be made to the settings. • The software is supplied on PC CDROM when purchased as a package along with the P808 hardware interface	P808Eng


P810WS	Configuration software for 55x • Configuration and SCADA software for 550 / 555 controllers. • To configure a module, this software must be used in conjunction with the 810 PC Interface.	P810WS


P810U	Windows drivers for the P810 Interface USB version • Allows the USB version of the 810 PC Interface to be used with Windows 98/Windows Xp


Sample	AutoCAD™ drawings to demonstrate usage of DSE 550, 555, 556 & 557 load share/control modules • AutoCAD™ drawings showing single/multiset applications using DSE controllers : 550, 555, 556 and 557. Typical wiring diagrams are included for the following applications and may be followed as shown, or modified to produce more complex systems : • Single set no break return system using 557. • Single set no break return system using 555 to give soft transfer (load ramping) and power control. • Multiple set (2-16) no break return system using 550s and 556. Can also be used for mains power control, peak lopping, import export control etc. • Multiple set (2-16) load sharing system as prime power using 550s. • Multiple set (2-16) load sharing system as backup to the mains (utility) supply, using 550s in conjunction with 530 automatic transfer switch. • Applications diagrams provided in industry standard AutoCAD™ (.dwg) files compressed into a self extracting executable file. NOTE :Access to these files require that you register to be a member. Visit SUPPORT \| USER REGISTRATION to request membership.


pt1	DSE Guide to Synchronising and Load Sharing PART 1 This manual contains a tutorial on Synchronising and Load Sharing for the unnacustomed as well as containing specific setup and interface details for the DSE 550 / 555 load share / load control modules. Part 2 of this manual contains details of connections to governors and AVRs. See also : 550 555 556 557 120 121 NOTE : Access to manuals require that you register to be a member. Visit SUPPORT \| USER REGISTRATION to request membership


pt2	DSE Guide to Synchronising and Load Sharing PART 2 This manual contains details of connections to governors and AVRs for the DSE 550 / 555 load share / load control modules. Part 1 of this manual contains a tutorial on Synchronising and Load Sharing for the unnacustomed as well as containing specific setup and interface details. See also : 550 555 556 557 120 121 NOTE : Access to manuals require that you register to be a member. Visit SUPPORT \| USER REGISTRATION to request membership.